During the coating process, the phenomenon of poor coating gap and wrinkling of the pole piece is analysed:I. The phenomenon of poor coating gap and reasons1. Tail dragging(1) material: slurry material, viscosity, solid content, slurry (surface) tension(2) equipment: coating - back roller distance.

Coating machine is mainly used for film, paper, etc. surface coating process production, this machine is the roll of substrate coated with a layer of specific function of the glue, paint or ink, etc., and drying and winding.The use of special multi-functional coating head, can achieve a variety of f

Causes.1. The coating roller and bearing precision is not enough to form a regular crossbar path;2. When the coating roller for the active drive, the choice of speed control programme is not appropriate, such as with harmonic reducer direct connection;3. Tension control system is unstable, or tensio

BOPP biaxially oriented film production line produces products mainly used for books, periodicals, annual report cover, cardboard, gift bags, food packaging and other appearance of three-dimensional sense of paper lamination. Another use is to compound with polyethylene film, cast polyethylene film,

There are two major types of preparation methods for evaporated silicon oxide-based barrier packaging films: physical vapor deposition (PVC) and chemical vapor deposition (CVC). Depending on the specific implementation method, there are various methods as follows. Barrier film production equipment1.