Extrusion cast laminators, which some manufacturers and users in the industry are used to calling film laminators, are also called extrusion laminators, cast machines, extrusion cast machines, cast laminators, film coating machines, plastic coating machines, coating laminators (inaccurate, actually

Plastic film, especially BOPP and other biaxially oriented film, there is an obvious molecular orientation, in a state of stress concentration, when there is no cut, it is difficult to tear, but once there is a cut, it can be more convenient to tear, so a large number of applications in the market,

Co-extruded cast filmsFor the semi-rigid sheet structures and flexible film structures discussed so far, the resins used are both different and partly identical. Semi-rigid sheets mostly use high modulus resins such as HIPS, HDPE and PP as the thickest structural layer: soft films use more low modul

Co-base barrier laminate films are barrier films produced by a co-extrusion lamination process. The co-extrusion lamination process is a molding method in which two or more different plastics are molten and plasticized by two or more extruders, respectively, into a pair of dies, and the paper cups a

Analysis of the causes of large noise in the work of plastic sheeting machines:(1) Motor parts1、Serious wear of rolling bearing for rotor shaft or low precision of bearing.2、The rotor shaft is bent and deformed.3, Carbon brush installation work position is incorrect.4、The rotor shaft end wind blade